We have already discussed in several articles what laminar and turbulent flow are, the conditions under which each occurs and their physical implications. However, there is another concept closely related to the state of a fluid that we have not yet explained. This is the Reynolds number (Re), and in this article we are going to take a closer look at it.
The Reynolds number is one of the most important dimensionless numbers in fluid mechanics and, at the same time, one of the most fundamental. In fact, it is one of the first concepts introduced in any fluid mechanics course. Broadly speaking, this number, which we will define below, allows engineers to predict whether a flow will be laminar or turbulent.

This number is named after the engineer and physicist Osborne Reynolds, who built upon the work of George Stokes (you may be familiar with the Navier–Stokes equations) to develop this concept.
So, what exactly is the Reynolds number? It represents the ratio between the inertial forces and viscous forces acting within a fluid. Let’s explain what each of these forces means in the simplest way possible:
-
Inertial forces are the forces experienced by any body undergoing acceleration or deceleration. From basic physics, we know that this force can be expressed as the product of mass and acceleration, Fi=m·a. Applying this definition to a fluid, it can be expressed as Fi=ρ·v2·L2, where ρ is the fluid density, v is its velocity and L is a characteristic length (which we will explain later).
-
Viscous forces are those that oppose the free movement of a fluid due to the internal friction between its particles, among other factors. They can be expressed as Fv=µ·L·v, where µ is the dynamic viscosity of the fluid.
As we have mentioned, the Reynolds number is simply the ratio between these two forces, and can therefore be expressed as:

And consequently, the final definition of the Reynolds number is:

We now know its mathematical definition, but how is it related to whether a fluid flows in a laminar or turbulent regime? Let’s examine two different cases:
-
If the Reynolds number is low, viscous forces are more significant than inertial forces. This means that the fluid’s viscosity causes its particles to move in an orderly manner. In other words, their trajectories do not cross, and the fluid moves in distinct layers. As you may have already guessed, this is known as laminar flow.
-
If the Reynolds number is high, inertial forces dominate over viscous forces. Put simply, the fluid velocity is so high that viscosity is no longer sufficient to prevent its particles from moving in a disordered and chaotic manner. This is, indeed, turbulent flow.
What does this mean in practice? By calculating the Reynolds number, we can determine whether a flow is laminar or turbulent. The transition value between these two flow regimes (known as the critical or limiting Reynolds number, (Rec)) depends on the type of problem being studied.
For example, in the case of fluid flowing through a pipe (where, incidentally, the characteristic length L is the pipe diameter), the critical Reynolds number is approximately 2,300.
However, in an aerodynamics problem, where L could be the chord length of an aerofoil, this critical Reynolds number will be considerably higher. In our article about the boundary layer, we explain this transition in greater detail.
So, the next time you hear someone mention the Reynolds number, remember that it is nothing more (and nothing less) than a very useful tool for determining the state of a fluid flow.
On this website, we will also explain the Mach number, which is particularly important in aircraft aerodynamics. Furthermore, in a dedicated article about the law of dynamic similarity, we will explain how this number is taken into account to achieve accurate simulations in a wind tunnel.
References:
[1] Nuclear Power. Velocity Boundary Layer – Thermal Boundary Layer. Available online: https://www.nuclear-power.net/nuclear-engineering/fluid-dynamics/boundary-layer/velocity-boundary-layer-thermal-boundary-layer/
Motorgiga. Inertial Force – Definition – Meaning.
Martín, A. (May 2011). Fluid Mechanics Lecture Notes. Available online: http://oa.upm.es/6934/1/amd-apuntes-fluidos.pdf
Wikipedia. Reynolds Number. Available online: https://en.wikipedia.org/wiki/Reynolds_number
Síguenos en las redes sociales:
